National Instruments Graphical User Interface Ultiboard User Manual page 272

Glossary
C
Chamfer Corners
Copper Area
Copper Island
D
Design Toolbox
DRC
F
Feedthrough Via
Force Vector
G
Grid
M
Mouse Grid
N
Net
Netlist
Normal Feed-Through
Via
NI Ultiboard User Manual
Corners at an increment of 45º on the trace routes.
A copper polygon.
A copper area that is not connected to any other copper.
By default, appears on left side of screen. Consists of multiple tabs used to
manage a design.
Design Rule Check.
A normal via that connects all layers, top, bottom and inner.
A line that indicates the optimal location for a part, considering all the
connections of the part to achieve the shortest possible connections.
Determines the increments by which traces can be placed on the board.
Controls the increments by which the cursor moves and where items are
placed.
A network of traces, to which you can add pins and copper areas.
Contains connectivity information about pins and parts.
Any via that connects all layers (top, bottom, and internal).
G-2 ni.com