National Instruments Graphical User Interface Ultiboard User Manual page 53

© National Instruments Corporation
Column
Bus Group This is the bus group in which the net is contained.
You can either enter the group name here, or use the
Group Editor. Refer to the
Editor
more information.
Differential This is the differential pair to which the net belongs.
Pair Refer to the
Chapter 3,
Shield Net Use the drop-down list to select the net to use to shield
this net. This feature is not available in all versions of
Ultiboard.
Shield Width Width of the net's shield. This feature is not available
in all versions of Ultiboard.
Show This is where you can show or hide the ratsnest for the
Ratsnest selected net. Refer to the
section of Chapter 4,
information.
Max Via This is the maximum number of vias allowed for the
Count selected net. You can use either the global settings, or
the group settings.
Via Drill This is the diameter of the via pad's hole.
Diameter
Via Pad This is the diameter of the total via pad.
Diameter
1-37
Description
Working with the Group
section of Chapter 3,
Working with the Group Editor
Setting Up a Design, for more information.
Working with Ratsnests
Working with
Chapter 1 User Interface
Setting Up a Design, for
section of
Parts, for more
NI Ultiboard User Manual