Tools»Equi-Space Traces; Tools»Change Shape; Tools»Update Shapes; Tools»Highlight Selection In Multisim - National Instruments Graphical User Interface Ultiboard User Manual

Tools»Equi-space Traces
Tools»Change Shape
Tools»Update Shapes
Tools»Highlight Selection in Multisim
Tools»Capture Screen Area
Tools»View 3D
Tools»View 3D Position
Tools»Show or Hide Height
© National Instruments Corporation
Use to equally space selected traces. Refer to the
section of Chapter 5, Working with Traces and
information.
Use to substitute a part from the database for the current selected part. Refer
to the Replacing Parts
information.
Use if you loaded Ultiboard V. 5 files into Multisim and plan to use 3D.
This command adds the necessary 3D information to the footprints in the
file.
Highlights a selected part in Multisim. Refer to the
of Chapter 4, Working with
You can take a screen capture of a selected area. Refer to the
Screen Area section of Chapter 8,
for more information.
Displays the design in 3D mode. Refer to the
section of Chapter 9, Viewing Designs in
This is only available when viewing the design in the 3D mode. Refer to the
Manipulating the 3D View
more information.
Shows or hides the height of selected objects in 3D mode. This is only
available when viewing the design in the 3D mode. Refer to the
an Object's Height section of Chapter 9,
information.
Appendix A
section of Chapter 4,
Parts, for more information.
Preparing for
3D, for more information.
section of Chapter 9,
Viewing Designs in
A-19
Menus and Commands
Equi-Spacing Traces
Copper, for more
Working with Parts, for more
Cross-probing
Capturing
Manufacturing/Assembly,
Viewing Designs in 3D
Viewing Designs in
Showing
3D, for more
NI Ultiboard User Manual
section
3D, for