Table of Contents
Advertisement
Chapter 5
Working with Traces and Copper
NI Ultiboard User Manual
4.
Optionally, click on one of the following checkboxes in the Advanced
options area and then click the Options button when it becomes
active:
•
Net Group—Displays the Select Groups dialog box where you
select the net groups to which you wish to apply the Keep-in/out.
•
Part Height—Displays the Part Height Ranges dialog box
where you enter the height of parts to which you wish the
Keep-in/out area to apply.
•
Part Group—Displays the Select Groups dialog box where you
select the part groups to which you wish to apply the Keep-in/out
area.
5.
Click OK in the Keep-in/Keep-out Properties dialog box.
If no Advanced options are set:
•
A DRC error is reported if an object is moved outside of a Keep-in
area.
•
A DRC error is reported if an object is inside a Keep-out area.
•
If there are multipleKeep-ins or Keep-outs, the objects may be divided
amongst the different areas at your discretion. Multiple areas then
behave as a single disjointed area.
If any Advanced options are set:
•
A DRC error is reported if an object is moved outside of a Keep-in
area.
•
A DRC error is reported if an object is inside a Keep-out area.
5-8
ni.com
Advertisement
Table of Contents
