File»Save As; File»Save All; File»Close; File»Close Project - National Instruments Graphical User Interface Ultiboard User Manual

Appendix A Menus and Commands
File»Save As
File»Save All
File»Close
File»Close Project
File»Close All
File»Import
File»Export
File»Save Technology
File»Load Technology
NI Ultiboard User Manual
Saves the current design file with a name and location that you specify in
the Save As dialog box.
Saves all open design files and projects.
Closes the current design file.
Closes the current project.
Closes all open design files and projects.
Use to import an Ultiboard Netlist or DXF file. Refer to the
Design from a Netlist File
the Importing a DXF File
more information.
Exports Ultiboard files for post-processing. Refer to the
section of Chapter 8,
information.
Lets you save a technology file based on the current design that contains the
design rules and configuration options for Ultiboard. Refer to the
Technology Specifications from a Design
a Design, for more information.
Lets you load a technology file that contains the design rules and
configuration options for Ultiboard. Refer to the
section of Chapter 2,
section of Chapter 2,
section of Chapter 3,
Preparing for Manufacturing/Assembly, for more
section of Chapter 2,
Beginning a Design, for more information.
A-2
Creating a
Beginning a Design, and
Setting Up a Design, for
Exporting a File
Saving
Beginning
Loading Technology Files
ni.com