Table of Contents
Advertisement
Chapter 8
Preparing for Manufacturing/Assembly
NI Ultiboard User Manual
Complete the following steps to change the SVG export properties:
1.
Select Scalable Vector Graphics in the Export dialog box and click
Properties.
2.
In the SVG File Format box, select one of:
•
Compressed svg—The SVG file will be compressed when it is
exported.
•
Uncompressed svg—The SVG file will not be compressed when
it is exported.
3.
Enter the Minimum stroke width in the SVG Options box. This is the
minimum width of an object's border, in micrometers.
4.
Click OK to accept the changes.
Working with other Properties
Working with Board Statistics Properties
The Board Statistics dialog box allows you to view the statistics on the
board being exported as well as to filter the file types to be exported and to
define the units of measurement in the statistics:
•
Statistics list—The list at the top of the dialog displays the board
statistics, including DRC violations.
•
File type box—Select any of TXT, CSV, and HTML.
•
Units box—Select the unit of measurement.
Working with Bill of Materials Properties
The Bill of Materials dialog box displays the bill of materials, and includes
facilities for sorting the information displayed:
•
Columns—Click column headers in the bill of materials list to sort the
columns.
•
File type box—Select any of TXT, CSV, and HTML.
•
Add column button—Other attributes that have been defined for
objects can be assigned to columns for reporting purposes (for
example, preferred part supplier). Click to define a new column.
•
Remove column button—Select a column to remove in the drop-down
list and click this button.
8-12
ni.com
Advertisement
Table of Contents
