Table of Contents
Advertisement
Place»Follow-me
Place»Connection Machine
Place»Shape
Place»Dimension
Place»Graphic»Line
© National Instruments Corporation
Use to place a trace between two selected points. Refer to the
Trace: Follow-me Method
Copper, for more information.
Use to place a trace between two pads. Refer to the
Connection Machine Method
and
Copper, for more information.
Use to place shapes of different types:
•
Ellipse—Use to place an ellipse.
•
Rounded Rectangle—Use to place a rounded rectangle.
•
Circle—Use to place a circle.
•
Pie—Use to place a pie shape.
•
Rectangle—Use to place a rectangle.
•
Polygon—Use to place a polygon.
Refer to the
Placing Shapes and Graphics
with
Parts, for more information.
Use to place different dimension types:
•
Standard—Use to place a standard dimension (a dimension to be
placed at an angle).
•
Horizontal—Use to place a horizontal dimension.
•
Vertical—Use to place a vertical dimension.
Refer to the
Placing Dimensions
more information.
Use to place a line or a trace, depending on the active layer. Refer to the
Placing Shapes and Graphics
and the
Placing a Trace: Manual Method
with Traces and
Copper, for more information.
Appendix A
section of Chapter 5,
section of Chapter 5,
section of Chapter 4,
of Chapter 4,
section of Chapter 4,
section of Chapter 5,
A-11
Menus and Commands
Placing a
Working with Traces and
Placing a Trace:
Working with Traces
Working
Working with
Parts, for
Working with
Parts,
Working
NI Ultiboard User Manual
Advertisement
Table of Contents
