National Instruments Graphical User Interface Ultiboard User Manual page 264

Appendix A Menus and Commands
Quick Layer Toggle
Use to toggle between the last copper layer or to the opposite copper layer
if the last layer was not copper.
Lock
Locks the selected elements in place so they cannot be moved.
Unlock
Unlocks the selected elements.
Place
Displays a number of elements that you can place on the design.
Shape
Displays a number of shapes that you can place on the design.
Orientation
Use these commands to adjust the orientation of parts as they are placed on
a design.
Align
Use these commands to align the edges of the elements.
Vertex
Use to add or remove vertices from all polygons, whether copper or
non-copper.
In-Place Part Edit
Switches to In-Place Edit mode for the selected item. Refer to the Editing
a Placed Part (In-Place Edit) section of Chapter 4, Working with Parts, for
more information.
Properties
Displays the properties dialog box for the type of element selected. Refer
to the Viewing and Editing Properties section of Chapter 4, Working with
Parts, for more information.
© National Instruments Corporation A-23 NI Ultiboard User Manual