Table of Contents
Advertisement
Glossary
T
Thermal Relief
Through-Hole Via
Trace Code
V
Vertex
Via
Visual Grid
W
Workspace
NI Ultiboard User Manual
Area around a pin where no copper appears, but which is crossed by copper
lines to make connections. A thermal relief is used to dissipate heat during
the soldering process.
Normal via.
The system provides 32 trace codes, each with a width and clearance.
"Clearance" describes the space required between pads and pads, between
traces and pads, and between traces and traces. This free space is
continuously checked by the real-time design rule check. Trace code
specifications can be exported as part of the design rules.
A vertex is a point of a polygon. A side of a polygon connects two vertices.
A plated through-hole in a printed circuit board used to route a trace
vertically (from one layer to another).
Provides a visual reference for you to visually align parts and traces.
The part of the screen where you build your design.
G-4
ni.com
Advertisement
Table of Contents
