Table of Contents
Advertisement
Appendix A
Menus and Commands
Place»Graphic»Arc
Place»Graphic»Bezier
Place»Graphic»Picture
Place»Graphic»Text
Place»Copper Area
Place»Powerplane
Place»Bus
NI Ultiboard User Manual
Use to place an arc or a trace, depending on the active layer. Refer to the
Placing Shapes and Graphics
and the
Placing a Trace: Manual Method
with Traces and
Copper, for more information.
Use to place a bezier or a trace, depending on the active layer. Refer to the
Placing Shapes and Graphics
and the
Placing a Trace: Manual Method
with Traces and
Copper, for more information.
Use to place a bitmap picture on the design. Displays a standard Open
dialog.
Select the desired bitmap and click to place it on the design. Drag the
bitmap to the desired size, and click the mouse again to place it.
Use to place text on the design. Useful for annotation purposes. Refer to the
Placing and Editing Text
Manufacturing/Assembly, for more information.
Use to define a copper area polygon. Refer to the
section of Chapter 5,
information.
Use to define layers as Power/Ground planes or to clear layers that were
previously defined as Power/Ground planes. Refer to the
Powerplanes
section of Chapter 5,
for more information.
Use to connect multiple traces between multi-pinned devices such as ICs.
Refer to the
Placing a Bus
Copper, for more information.
section of Chapter 4,
section of Chapter 5,
section of Chapter 4,
section of Chapter 5,
section of Chapter 8,
Working with Traces and
Working with Traces and
section of Chapter 5,
A-12
Working with
Parts,
Working
Working with
Parts,
Working
Preparing for
Placing Copper Areas
Copper, for more
Placing
Copper,
Working with Traces and
ni.com
Advertisement
Table of Contents
