Setting The File Name (File Name) - Muratec MFX-2550 User Manual

Setting the File Name (File Name)

You can edit the file name for the scanned image data. You can also enter the file name
using a file name registered in advance.
Note
• If you do not edit the file name, the current year, month, day, and time are
automatically used as the file name when the data is transmitted or saved. For
example, the file name for a TIFF file created at 1:30:30 pm on the 15th of January,
2010 will be "20100115133030.tif".
• For details on registering filenames, refer to "
page 7-55) or "Setting Templates" in Chapter 3 of the OfficeBridge Guide.
Entering a New File Name
„
1
Load the document, and press <Scan>.
2
Press [File Name].
If [File Name] is not displayed, press [Advanced] and then select [File Name].
3
Enter the file name, and press [Enter].
• Up to 80 characters can be entered for the file name.
• For details on entering characters, refer to Chapter 1, "Entering Characters" in the
Administrator's Guide.
Registering / Editing File
Advanced Scan Features
1
2
Names" (see
2-25