Setting Mode Protection - Muratec MFX-2570 Administrator's Manual

Setting Mode Protection

You can prohibit the copy, scanner, fax, or printer modes from being used.
For example, if you enable Copy Protect, the machine will not switch to the copy screen,
even if <Copy> is pressed.
Note
• If you prohibit the use of the mode set as the
automatically be changed to the My MFP screen.
• You can also prohibit the use of modes by user policy using the user policy settings
of OfficeBridge. For details, refer to Chapter 3, "Setting Security" in the OfficeBridge
Guide.
1
Press <Setting>.
2
Press [Management].
3
If an administrator password is set, enter the password and press [Enter].
If an administrator password is not set, proceed to step 4.
4
Press [Mode Protect Setting].
ready screen, the ready screen will

Setting Mode Protection

1
2
2-33