Using Direct Commands; Remote Operation - Panasonic KX-TG1860BXS Service Manual

9.4.

Using Direct Commands

You can operate the answering system by pressing dial keys, rather than navigating through the menus. To use the following
commands, press
9.5.

Remote Operation

Using a touch tone phone, you can call your phone number from outside and access the unit to listen to messages or change
answering system settings. The unit's voice guidance will prompt you to press certain dial keys to perform different operations.
Important:
• In order to operate the answering system remotely, you must first turn on remote operation by setting a remote access code.
This code must be entered each time you operate the answering system remotely.
9.5.1. Turning Remote Operation On/Off
A 3-digit remote access code must be entered when operating the answering system remotely. This code prevents
unauthorised parties from listening to your messages remotely. After you store your remote access code, remote operation is
possible.
9.5.2. Turning on the Answering System Remotely
(middle soft key), select
KX-TG1860BXS / KX-TG1860BXT / KX-TCA132CXS / KX-TCA132CXT / KX-TCA130CXS / KX-TCA130CXT
, then press .
31