Local Bus Slave (Vmebus Master) Attribute Register 2 - Motorola MVME172 Programmer's Reference Manual

Vme embedded controller
Table of Contents

Advertisement

Local Bus Slave (VMEbus Master) Attribute Register 2

ADR/SIZ
BIT
15
NAME
D16
OPER
R/W
RESET
0 PS
This register is the attribute register for the second local bus to VMEbus
bus map decoder.
AM
WP
D16
http://www.mcg.mot.com/literature
$FFF40028 (8 bits of 32)
14
13
12
WP
R/W
0 PS
These bits define the VMEbus address modifier codes the
VMEbus master uses for the segment defined by map
decoder 2. Since the local bus to VMEbus interface does
not support block transfers, the block transfer address
modifier codes should not be used.
When this bit is high, write posting is enabled to the
segment defined by map decoder 2. When this bit is low,
write posting is disabled to the segment defined by map
decoder 2.
When this bit is high, D16 data transfers are performed to
the segment defined by map decoder 2. When this bit is
low, D32 data transfers are per- formed to the segment
defined by map decoder 2.
LCSR Programming Model
11
10
9
AM
R/W
O PS
2
8
2-45

Advertisement

Table of Contents
loading

Table of Contents