Vmebus Slave Ending Address Register 1; Vmebus Slave Starting Address Register 1 - Motorola MVME172 Programmer's Reference Manual

VMEchip2
2

VMEbus Slave Ending Address Register 1

ADR/SIZ
BIT
NAME
OPER
RESET

VMEbus Slave Starting Address Register 1

ADR/SIZ
BIT
NAME
OPER
RESET
2-28
$FFF40010. The adders allow any size board to be mapped on any 64KB
boundary. The adders are disabled and the address replacement method is
used following reset.
Write posting is enabled for the segment by setting the write post enable
bit in the attribute register. Local bus snooping for the segment is enabled
by setting the snoop bits in the attribute register. The snoop bits in the
attribute register are driven on to the local bus when the VMEbus to local
bus interface is local bus master.
31
This register is the ending address register for the first VMEbus to local
bus map decoder.
15
This register is the starting address register for the first VMEbus to local
bus map decoder.
$FFF40000 (16 bits of 32)
. . .
Ending Address Register 1
R/W
0 PS
$FFF40000 (16 bits of 32)
. . .
Starting Address Register 1
R/W
0 PS
Computer Group Literature Center Web Site
16
0