Smb Server Settings - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Attribute Type of E-mail Address
Set the e-mail address attribute type. Enter a field attribute name to be used as e-mail
information from the user information registered on the LDAP server. Up to 32 characters
are allowed. For Windows, enter "mail" for an attribute name used as e-mail information.
Attribute Type of Fax Number
Set the fax number attribute type. Up to 32 characters are allowed.
Attribute Type of IP Fax (SIP) Number
Set a field attribute name that is used as IP fax (SIP) number information from the user
information registered on the LDAP server. Up to 32 characters are allowed.
Attribute Type of E-mail (Internet Fax)
Set the Internet fax address attribute type. Up to 32 characters are allowed.
Attribute Type of Custom Items 1, 2, and 3
Set the LDAP attribute type of custom items 1 to 3. In addition to [Attribute Type of Name]
and [Attribute Type of E-mail Address], you can assign user attributes registered on the
LDAP server for a search. Up to 32 characters are allowed.
Attribute Name of Custom Items 1, 2, and 3
Set the attribute names assigned to custom items 1 to 3. Up to 16 single-byte characters
are allowed.
Note
To encrypt communications using this feature, a trusted root certificate authority and all intermediate
certificate authorities that are registered in the path of a certificate to use must be registered.
Attribute Type of Certificate
Set the certificate attribute type. Select and enter the field name to use as a certificate
from among the user information registered on the LDAP server. Up to 32 single-byte
characters are allowed.
For Windows, enter "userCertificate;binary" for an attribute name used as certificate
information. The information is used as an S/MIME certificate when you specify an address
using the directory service to encrypt e-mail transmission by S/MIME.
Note
To encrypt communications using this feature, a trusted root certificate authority and all intermediate
certificate authorities that are registered in the path of a certificate to use must be registered.
Maximum Number of Search Results
Set a maximum number of address to display from search results from 5 to 100. If the
search results exceed the maximum, the search stops at the maximum number set.
The default value is 50.
Search Time-Out
Select whether or not to set a search time-out. Set the value from 5 to 120 seconds in 1
second increments.

SMB Server Settings

Set the following items to use SMB server as a remote authentication server.
Connectivity & Network Setup
219
5