System Settings Procedure; Step1 Entering System Administration Mode; Step2 Entering The System Administrator User Id And Passcode - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Tools

System Settings Procedure

To change or customize the system settings, enter the System Administration mode.
This section describes the basic procedures for system settings.
The following shows the reference section for each procedure.
"Step1 Entering System Administration Mode" (P.138)
"Step2 Entering the System Administrator User ID and Passcode" (P.138)
"Step3 Selecting [Tools]" (P.139)
"Step4 Selecting a Setting Item on the [Tools] Screen" (P.139)
"Step5 Setting a Feature" (P.142)
"Step 6 Exiting System Administration Mode" (P.142)

Step1 Entering System Administration Mode

1
Press the <Log In/Out> button or the login information field on the touch screen.
5

Step2 Entering the System Administrator User ID and Passcode

To enter the system administration mode, enter the system administrator's user ID. If
[Passcode Entry for Control Panel Login] is set to [On] under [Tools] > [Authentication/
Security Settings] > [Authentication] > [Passcode Policy], you need to enter the passcode.
We recommend that you change the system administrator's user ID and passcode
immediately after installing the machine.
Reference
138
1 2 3
4 5 6
7 8 9
0 ＃
C
For more information on how to change the passcode, refer to "System Administrator Settings" (P.313).