Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 515

Error Code
016-708 [Cause] Unable to annotate because of insufficient hard disk space.
[Remedy] Delete unnecessary data from the hard disk to free up disk
space.
016-709 [Cause] An error occurred during print processing.
[Remedy] Contact our Customer Support Center.
016-710 [Cause] Unable to register the Delayed Print document because of hard
disk malfunction.
[Remedy] Contact our Customer Support Center.
016-711 [Cause] The upper limit for the e-mail size has been exceeded.
[Remedy] Take one of the following measures, and then try sending the
mail again.
016-712 [Cause] Unable to process the document because the specified scan
area is too small.
[Remedy] Increase the resolution or scan area.
016-713 [Cause] The passcode entered does not match the passcode set on the
folder.
[Remedy] Enter the correct passcode.
016-714 [Cause] The specified folder does not exist.
[Remedy] Create a new folder or specify an existing folder.
016-715 [Cause] The machine failed to access the ESCP form because the
password of the ESCP form does not match.
[Remedy] Enter the correct password of the ESCP form.
016-716 [Cause] Unable to spool TIFF file because of insufficient hard disk
space.
[Remedy] Delete unnecessary files and users from the machine.
Reference
Refer to "Job Status" > "Printing and Deleting Stored Jobs" in the User Guide.
016-717 [Cause] Unable to create a Transmission Report - Job Undelivered or a
Transmission Report because the transmission result
information required for creating the report is not stored in the
machine's memory.
[Remedy] Take one of the following measures:
Cause and Remedy
Reduce the number of pages of the document.
Lower the resolution with [Resolution].
Reduce the magnification with [Reduce/Enlarge].
Ask your system administrator to increase the value set for
[Maximum Total Data Size].
Execute the jobs for large size Internet fax documents (about
2GB) by splitting each document to minimize memory or
HDD usage.
If many scan or Internet fax documents are being processed,
wait until the jobs are completed to execute a new job.
After completing the job that you want to confirm in a
report, do not execute 200 or more jobs before printing the
report.
Error Code
15
515