Stored Programming; Create Job Flow Sheet - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Create/Change Link
A screen to link a job flow sheet appears. You can select the existing job flow sheets or
create a new job flow sheet.
Reference
For more information about the operation, refer to "Create Job Flow Sheet" (P.279).
Auto Start
If you select the [Auto Start] check box, when a file is stored in a folder, the procedures
registered on the job flow linked automatically starts.
When the [Delete Folder] Button is Selected
Selecting this button deletes the selected folder. Any files stored in the folder are also
deleted.
If [Login Type] is set to [No Login Required], all the job flow sheets, including a local user
created on the [Create Folder] screen or job flow sheets created on the [Send from Folder]
screen, are deleted as well.
Important
Once files or job flow sheets are deleted, they cannot be restored.

Stored Programming

The Stored Programming feature enables you to register frequently used settings and
record a series of operations.
Reference
For more information on operation, refer to "Stored Programming" > "Registering/Deleting/Renaming Stored Programs" in the
User Guide.

Create Job Flow Sheet

Job flow is a feature to execute a series of registered actions. Up to 1000 job flow sheets
can be created.
The target of a job flow is files stored in a folder. A job flow can be executed by using one of
the following three methods:
by automatically starting a job flow when a file is stored in a folder
by selecting a file stored in a folder to manually execute the associated job flow
by selecting a file stored in a folder to select a job flow and execute manually
To start a job flow automatically, you must link the job flow to a folder. When a file is stored
in the folder, it is automatically processed in accordance with the job flow sheet linked.
Note
To link a folder with a job flow sheet created with [Create Job Flow Sheet], start from [Send from Folder] or
[Create Folder]. For more information, refer to "Send from Folder" in the User Guide and ""Create Folder"
(P.276).
Features that can be registered are listed below.
Forward to (FTP, SMB, e-mail, fax, IP fax, and Internet fax)
Setup
5
279