Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 455

Symptom
Unable to copy Are the document guides
with the on the document feeder set
specified size. in the correct positions?
Is the document folded?
Is the document a non-
standard size?
Paper is often Is the paper loaded
jammed or correctly in the tray?
wrinkled.
Is the paper tray inserted
correctly?
Is the paper damp?
Is the paper curled?
Are the paper and paper
tray settings correct?
Are any torn pieces of
paper remaining or is there
a foreign object in the
machine?
Is non-standard paper
loaded in the tray?
Is paper exceeding the
maximum fill line in the
tray?
Cause
Adjust the document guide positions.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Unfold and correctly load the document.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Specify the document size.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Load the paper correctly.
Reference
Refer to ""Loading Paper" (P.66).
Firmly push in the paper tray until it stops
to insert it correctly.
Reference
Refer to "Loading Paper" (P.66).
Replace the paper with a new one.
Reference
Refer to "Loading Paper" (P.66).
Turn over the paper in the tray, or replace
the paper with a new one.
Reference
Refer to "Loading Paper" (P.66).
Correctly set the paper and paper trays to
correspond to the paper.
Reference
Refer to "Changing the Paper Settings" (P.72).
Open the cover of the machine or slide
out the paper tray to remove the torn
pieces or the foreign object.
Reference
Refer to "Paper Jams" (P.612) or "Loading Paper"
(P.66).
Replace with paper that meets machine
specifications.
Reference
Refer to "Paper Types" (P.48) or "Loading Paper"
(P.66).
Load paper in the paper tray so that it
does not exceed the maximum fill line.
Reference
Refer to "Loading Paper" (P.66).
Machine Trouble
Remedy
15
455