Before Using the Machine
Note
This section describes the installation procedures for the Ethernet interface.
1
Press the power switch to switch off the power.
2
Make sure that the touch screen is blank and the <Power Saver>button does not light up.
3
Open the front cover.
1
4
Press the main power switch to the [ ] position to switch off the main power.
5
Connect a network cable to the Ethernet interface connector.
Note
6
Press the main power switch to the [ | ] position to switch on the main power.
7
Close the front cover.
8
Press the power switch to switch on the power.
Reference
22
100BASE-TX
10BASE-T
The machine supports IEEE802.3az (a compliance standard of wired LAN) which reduces the power
consumption of the Ethernet equipments while suspending data transmission. To use this feature, both of
the equipments need to support IEEE802.3az.
When the Secondary Ethernet Kit (optional) is not installed
When the Secondary Ethernet Kit (optional) is installed.
Prepare a network cable suitable for your network connection. When you replace the network cable, contact
our Customer Support Center.
For more information on setting items, refer to "Printer Environment Settings" (P.335).