Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 598

Hide thumbs Also See for DocuCentre-V C2265:

Table of Contents

Problem Solving

An error occurred.

[Remedy] Switch off the machine power, make sure that the touch screen

is blank, and then switch on the machine power. If the same

message is displayed again, contact our Customer Support

An error occurred.

[Remedy] Switch off the machine power, make sure that the touch screen

is blank, and then switch on the machine power. If the same

message is displayed again, contact our Customer Support

The finisher's hole punch waste container is full.

[Remedy] Empty the hole punch waste container.

For more information on how to empty the hole punch waste container, refer to "Emptying

Punch Waste Container (for Finisher-B1)" (P.93).

An error occurred in the USB memory device.

[Remedy] Switch off the machine power, make sure that the touch screen

is blank, and then switch on the machine power. If the error still

is not resolved, contact our Customer Support Center.

Failed to enter the Download mode.

[Remedy] Contact our Customer Support Center.

An error occurred in the machine.

[Remedy] Switch off the machine power, make sure that the touch screen

is blank, and then switch on the machine power. If the same

message is displayed again, contact our Customer Support

An error occurred in the machine.

[Remedy] If an error occurred while printing, turn off the machine once,

then turn the machine on holding down both the <Start> and

<Stop> buttons simultaneously for six seconds. This deletes the

print data that caused the error. If the error was caused by

another reason, switch off the machine power, make sure that

the touch screen is blank, and then switch on the machine

power. If the error still is not resolved, contact our Customer

Support Center.

Cause and Remedy

Chapters

Table of Contents

Docucentre-v c2263