Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 694

Appendix
Print control
Stapling
Manual feed
traycheck
indicator
Punching
Number of holes
Emulation target
printer
Pen attributes
16
694
162 Sets the paper margin when auto scaling is being used.
(Papermargin) [0] - [99] (Default: 0) : 0 to 99 mm
Note
The setting of the paper margin is valid when [Document size] is set to [Auto].
163 Sets whether to perform image enhancement, which artificially increases the
(Imageenhanc resolution of an image and smooth its edges.
ement) [0]:OFF
[1] (Default) : ON
164 Sets the stapling position.
[0] (Default) : None
[1]: Top Left
[2]: Top Double
[3]: Top Right
[4]: Left Double
[5]: Right Double
[6]: Bottom Left
[7]: Bottom Double
[8]: Bottom Right
165 [0]:None
[1] (Default): Yes
166 Select the position for punching holes.
[0](Default): None
[1]:Top
[2]:Bottom
[3]:Left
[4]:Right
167 Select the number of punch holes.
[0] (Default) : 2 holes
[1]:3 holes
[2]:4 holes
169 Select the machine to emulate.
[0] (Default): HP750
[1]: FX4036
800-815 (Pen Set the width (thickness of the line) of the 16 pens (No. 00 to 15). You can set
width) (No. 0- the width from 0.0 to 25.5 mm in 0.1 mm increments. No. 00 denotes Item
No.15) No. 800.
[0] - [255] (Default: 3) : 0 to 25.5 mm
Note
If the image is reduced by concern with the relationship between [Document size]
and [Paper size] settings, the pen width is reduced accordingly to 0.1 mm at the
smallest.
The width of the line gets thick symmetrically with respect to the center of the line.
If the width is set to 0.0 mm, nothing is plotted.