Create Fax Group Recipients - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

TIFF-J
Select this profile for sending documents in JBIG.
When the [Delete Entry] Button is Selected
Selecting this button deletes all the information registered for the address selected. To
delete all information registered, select [Delete].
Important
Deleted information cannot be restored.

Create Fax Group Recipients

You can register addresses for broadcast transmission as a group. Each group caninclude up
to 20 address numbers. The maximum number of groups that can beregistered is 50.
Note that recipients to be added to a group must be registered in the speed dials on the
Address Book.
Note
Even when the speed dial number of fax recipients (address book entries) are included in a group, the
machine does not send faxes to the recipients if their address types are set to [Email] or [Server].
You cannot include a group in another group.
You can use wildcards for specifying the numbers in the last one or two digits as shown in the following
example:
001*:Specifies the 10 addresses with address numbers 010 to 019.
****:Specifies all address numbers.
1
Select [Create Fax Group Recipients].
2
Select a group number to register.
Note
Select[
3
Select [Group Name] and enter a group name to register, and then select [Save].
]to display the previous screen or[ ]to display the next screen.
Setup
5
299