Staple Jams In Staple Cartridge (For Finisher-A1) - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Important
Remove the bent staple when opening the staple cartridge cover. If you do not remove the bent staple, a
staple jam may occur as a result. Use the staple cartridge cover only when removing the bent staple.

Staple Jams in Staple Cartridge (For Finisher-A1)

This section describes how to clear staple jam occurred in the staple cartridge of the
Finisher-A1 (optional).
1
Make sure that the machine is not operating, and open the finisher front cover.
2
Take the staple cartridge out of the machine.
Note
The staple cartridge is firmly inserted. A slight force is required to pull the cartridge out of the finisher.
3
After you take out the staple cartridge, check inside of the finisher for any remaining
staples.
Stapler Faults
15
627