Configuring Authentication Server Settings For Kerberos; Configuring Authentication Server Settings For Smb - Fuji Xerox Color C60 System Administrator Manual

Security
4. Select Enabled next to Non-account Print to allow users without accounts to access
the printer.
5. To allow a guest user to access the printer, select On next to Guest User. Type the
Guest Password, then retype the password to verify.
6. To have the printer cache remote account information, select Enabled next to Save
Remote Accounts in This Machine. Specify if you want to have the cached
information deleted (click Delete Remote Accounts) and how often you want to
delete cached information by selecting a deletion day, month, and time.
7. Click Apply, then click Reboot Machine.
8. After the printer restarts, refresh your browser and navigate back to the
Authentication Configuration > Step 1 of 2 page, and click Next at the bottom of
the page.
9. Next to Authentication System, click Configure.
10. On the Authentication System page, select your Authentication System from the
drop-down list.
11. Type the Server Response Time-Out, and the Search Time-Out.
12. Select Enabled next to Assign UPN (User Principal Name) if desired.
13. Click Apply to accept the changes or Undo to retain the previous settings.
14. Click Reboot Machine.

Configuring Authentication Server Settings for Kerberos

To configure authentication settings for the Kerberos server:
1. In CentreWare Internet Services, click Properties > Security > Remote
Authentication Servers > Kerberos Server.
2. Next to Server Certificate Validation, select Enabled to enable the Kerberos validation
services.
3. Under Kerberos Server 1, type the host name or IP address of your primary server.
4. Type the Primary Server Port Number.
5. Type the host name or IP address of your secondary server.
6. Type the Secondary Server Port Number.
7. Type the Domain Name (realm name) of your server.
8. Type the server name, port name, and domain name of any additional Kerberos
servers if desired.
9. Click Apply to accept the changes or Undo to retain the previous settings.

Configuring Authentication Server Settings for SMB

To configure settings for the Server Message Block (SMB) server:
1. In CentreWare Internet Services, click Properties > Security > Remote
Authentication Servers > SMB Server.
2. Next to SMB Server Setup, select By Domain Name or By Server Name /IP Address.
6-4 Xerox ® Color C60/C70 Printer
System Administrator Guide