Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 745

The call destination can be specified also with the keyboard displayed on the screen.
Note
To disconnect the call, select [Line Cut].
If your telephone line is set to touch-tone, [Tone (:)] does not appear.
If you want to send tones (or to use the touch-tone services) while using a pulse line, select [Tone (:)].
Some touch-tone services may not be available even if you set your telephone to send tones.
4
When the call is connected, lift the receiver and start speaking.
5
After the call is finished, place the receiver back in the cradle.
Important
Make sure that the receiver is placed properly in the cradle. Otherwise, the line remains "busy".
Using the Telephone
16
745