Certificate Revocation Retrieval Settings - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

IEEE 802.1x Settings
Configure the IEEE 802.1x settings.
IEEE 802.1X
Set whether or not to use IEEE 802.1x authentication.
Authentication Method
Select from [EAP-MD5], [EAP-MS-CHAPv2], [PEAP/MS-CHAPv2], or [EAP-TLS].
Login User Name
Enter the login user name with up to 128 characters.
Login Password
Enter the login password with up to 128 characters.
Server Certificate Verification
Select whether or not to verify a server certificate when [PEAP/MS-CHAPv2] is selected in
[Authentication Method].

Certificate Revocation Retrieval Settings

Configure the settings for certificate revocation retrieval.
Level of Certificate Verification
Select a level of certificate verification from [Low], [Medium], or [High].
Selecting [Low] does not verify the validity of certificates.
Selecting [Medium] verifies the validity of certificates. If a certificate cannot be verified
because of a network error or any other problems, the certificate is determined as valid.
Selecting [High] verifies the validity of certificates, and determines only certificates that
have not been revoked as valid.
Retrieval of Certificate Status
Select the method to verify the validity of certificates.
Select [By Retrieving CRL] if the machine retrieves a CRL (Certificate Revocation List) from
the validation authority to verify the revocation status of the certificate. Select [By OCSP] if
the machine uses OCSP (Online Certificate Status Protocol), which can verify the validity
revocation status of the certificate, to have the certificate authority or validation authority
check the revocation status.
Auto Retrieval of CRL
Select whether or not to automatically retrieve a CRL.
CRL Retrieval Time-Out
Specify a time-out value to retrieve a CRL from 5 to 60 seconds in 1 second increments.
Send Query to OCSP Responder With
Select how to access an OCSP responder from [URL as Specified in Certificate] or [URL as
Specified by Administrator].
URL of OCSP Responder
Enter the URL of an OCSP responder when [URL as Specified by Administrator] has been
selected for [Send Query to OCSP Responder With]. Up to 255 characters are allowed.
Connectivity & Network Setup
225
5