Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 590

Problem Solving
15
590
Error Code
033-717 [Cause] The folder passcode specified from the sender's machine is
incorrect. Or, the machine passcode for reception is incorrect.
[Remedy] Inform the correct information to the sender's machine.
033-718 [Cause] Fax or polling documents do not exist in the folder specified
from the sender's machine.
[Remedy] Store fax or polling documents into the folder as necessary.
033-719 [Cause] The document may be deleted by turning the machine off and
then on.
[Remedy] Retry sending.
033-721 [Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
033-724 [Cause] The reception was interrupted because the image volume
exceeded the upper limit.
[Remedy] Install the Extension System Memory to increase the maximum
volume of image data.
033-725 [Cause] The hard disk is full.
[Remedy] Delete unnecessary data from the hard disk to free up disk
space.
033-726 [Cause] The received document was printed with 1 sided printing,
because 2 sided printing is not available for mixed sized
documents.
[Remedy] No measure is required.
033-728 [Cause] The auto print formatting of the received fax document was
interrupted by a manual print operation.
[Remedy] No measure is required. The machine will automatically start
the auto print job after manual printing completes.
033-731 [Cause] The printing of the received fax document was interrupted.
[Remedy] The auto print processing of the received fax document was
interrupted by a manual print operation. No measure is
required.
033-732
[Cause] An error occurred while connecting to the EP system.
[Remedy] This is an error occurring during maintenance work by Fuji
Xerox. No measure is required.
033-733
[Cause] An error occurred during fax transmission.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
033-734 [Cause]
Because a report job was instructed while preparing to print a
received fax, the printing of the received fax is temporarily
suspended.
[Remedy] No measure is required.
Cause and Remedy