Receive Control - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Tools

Receive Control

You can set how received print jobs should be handled.
Reference
1
Select [Receive Control], and then select [Change Settings].
2
Select any item.
3
According to the selected item, set the processing to apply to jobs.
5
4
Select [Save] after the setting is completed.
According to Print Auditron
Specifies how print jobs should be handled when the Authentication and Accounting
features are enabled and [Print] under [Service Access] is set to [Locked].
Note
When [According to Print Auditron] is selected, [Job Login Success], [Job Login Failure], and
[Job without User ID] are displayed.
Set the processing to apply to successfully authenticated jobs.
Note
Set the processing to apply to jobs authentication failed (whose information such as the
user ID and passcode has been incorrectly registered on the print driver).
Set the processing to apply to jobs with no authentication user ID attached (such as print
jobs sent from CentreWare Internet Services or e-mail print).
322
For information about printing from a print driver, refer to "Computer Operations" in the User Guide.
For information about printing or deleting the print job saved, refer to "Job Status" > "Printing and Deleting
Stored Jobs" > "Private Charge Print" in the User Guide, and about deleting a Private Charge Print job with an
invalid User ID, refer to "Deleting a Private Charge Print Job with an Invalid User ID" (P.108).
When the Authentication and Accounting features are disabled and [Print] under [Service Access] is set to
[Unlocked], the settings specified in the print driver are applied.
Job Login Success
To print jobs, select [Print Job].
To save jobs as Private Charge Print, select [Save as Private Charge Print Job]
When [Save as Private Charge Print Job] is selected, the Secure Print, Sample Set, Store in Remote Folder, and
Delayed Print settings specified in the print driver will be ignored.
Job Login Failure
To save jobs as Private Charge Print, select [Save as Charge Print Job].
To delete jobs, select [Delete Job].
Job without User ID