Image Quality Trouble - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Problem Solving

Image Quality Trouble

If the image quality of printed documents is poor, identify the symptom in the following
table to perform the remedy.
If image quality does not improve even after performing the remedy, contact our Customer
Support Center.
15
458
Symptom
The copy is dirty. Is the document glass or the
document cover dirty?
Is the document a
transparent type such as a
transparency film?
Is the document colored,
rough, or a blueprint?
Is the document glossy
printing paper?
The copy is too Is the copy density set to
dark. [Darken]?
The copy is too Is the document faint?
light.
Is the copy density set to
[Lighten]?
The copy is Are the paper edges aligned
slightly and the leading edge
misaligned. adjusted to the tray corners?
The copy is Is the document loaded
misaligned or correctly?
skewed.
Is the paper loaded correctly
in the tray?
Are the paper guides of Tray 5
correctly aligned to the
paper?
Cause
Clean the document glass and the document
cover.
Reference
Refer to "Cleaning the Document Cover and Document
Glass" (P.99).
If the document is transparent, dirt on the
document cover will be copied. Place a white
sheet of paper on top of thedocument when
copying.
Adjust the copy density or image quality.
Reference
Refer to "Copy" > "Image Quality" in the User Guide.
Glossy printing paper easily sticks to the
document glass, and shadows are sometimes
copied, soiling the image. Place a
transparency film under the document when
copying.
Adjust the copy density.
Reference
Refer to "Copy" > "Image Quality" in the User Guide.
Align the paper edges, adjust them to the
tray's top corners, and reload the paper.
Reference
Refer to "Loading Paper" (P.66).
Load the document correctly.
Reference
Refer to "Copy" > "Copying Procedure" in the User
Guide.
Load the paper correctly.
Reference
Refer to "Loading Paper" (P.66).
Reference
Refer to "Loading Paper in Tray 5 (Bypass)" (P.68).
Remedy