Configuration For Ic Card Reader (Optional); Step 1 Preparations - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Authentication and Accounting Features

Configuration for IC Card Reader (Optional)

You can use a smart card for authentication by comparing the information registered on
the smart card and the user information on the machine. You can also restrict the machine
use and perform accounting of the jobs using the information registered on the smart card.
This section describes the supported smart cards and how to register a smart card to use at
the machine.
The following shows the reference section for card information and each procedure.
"Step 1 Preparations" (P.444)
"Step 2 Logout Method Using the Smart Card" (P.445)
"Step 3 Registering Smart Card Information" (P.445)

Step 1 Preparations

The machine supports IC Card Reader available for the following smart card type:
When using Embedded IC Card Reader
* : The embedded IC Card Reader of the machine may not support some smart cards.
When using Embedded IC Card Reader A
14
444
Note
An optional component is required to use this feature. For more information, contact our Customer Support
Center.
®
MIFARE (Type A)
- Fuji Xerox IC Card (Type A)
- Other MIFARE compatible smart cards
elWISE/ELWISE (Type B)
- eLWISE
- ELWISE
®
FeliCa
- Fuji Xerox IC Card
- IC Card compatible with SSFC
- Other FeliCa compatible smart cards
®
MIFARE (Type A)
Fuji Xerox IC card (Type A)
Other MIFARE compatible smart cards
®
FeliCa
- Fuji Xerox IC card (IDm only)
- Other FeliCa compatibled smart cards (IDm only)*
®
HID Prox
® ®
HID iCLASS (UID only)
EM Prox
HITAG(HITAG2)
*
®
version 1.0 format
*
*