Configuration Of Store To Wsd; Step 1 Preparations; Step 2 Enabling Port - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Configuration of Store to WSD

This section describes how to configure the machine to use the Store to WSD service.
The following shows the reference section for each procedure.
"Step 1 Preparations" (P.379)
"Step 2 Enabling Port" (P.379)
"Step 3 Confirmation on the Computer" (P.380)
Note
WSD stands for Web Services on Devices.

Step 1 Preparations

The following environment is required to use the Store to WSD feature on the machine.
The following operation system must be installed on a destination computer.
- Microsoft Windows 8
- Microsoft Windows 8.1
- Microsoft Windows 7
- Microsoft Windows Vista Service Pack 2
- Microsoft Windows Server 2012
- Microsoft Windows Server 2012 R2
Note
WSD stands for Web Services on Devices.

Step 2 Enabling Port

To use the Store to WSD service, enable the WSD scan port. The following describes the
configuration procedures on the machine.
Note
You can configure the settings using CentreWare Internet Services. For information on how to use
CentreWare Internet Services, refer to "Configuring Machine Settings Using CentreWare Internet Services"
(P.331).
WSD stands for Web Services on Devices.
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
The default user ID is "11111".
The default passcode is "x-admin".
3) Select [Tools] on the Services Home screen.
2
Enable the port.
Configuration of Store to WSD
379
9