Reports; Adjust Color Registration - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Tools
Calibration
When color gradation of a printed image shifts, you can calibrate the color of the image to
maintain the image quality of the machine at a certain level.
Reference
Note
Screen Type
Select from [Copy Job], [Print Job 1], and [Print Job 2].
Reference
Paper Supply
Select a tray.
Target
Select from [Copy & Print Jobs], [Copy Jobs Only], [Print Jobs Only], and [None].

Adjust Color Registration

5
You can adjust color registration if colors are misaligned in outputs.
Selecting [Start] starts color registration.
Important

Reports

You can configure settings related to printing reports.
Print Reports Button
Set the display method of [Print Reports] under the [Machine Information] screen and
[Error History Report] under the [Faults] screen displayed by pressing the <Machine Status>
button.
If you select [Disabled], the [Print Reports] button under [Machine Information] and the
[Error History Report] button under [Faults] are displayed only in the System Administration
mode.
If you select [Disabled], the [Print Reports] button under [Machine Status] > [Machine
Information] and the [Error History Report] button under [Faults] are displayed only in the
System Administration mode.
Reference
164
For more information, refer to "Executing Calibration" (P.103).
If you cannot calibrate the machine to adjust for a shift in color gradation despite the periodic calibration,
contact our Customer Support Center.
For more information about screen type, refer to "Executing Calibration" (P.103).
Do not execute color registration continuously. Doing so may impair the performance of the machine.
For information on Print Reports, refer to "Print Reports" (P.115).
For information on Error History Reports, refer to "Faults" (P.132).