Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 485

Symptom
Part of the The document is pasted or
image is missing. folded.
The image is not The document glass or the
the desired size. document cover is dirty.
The document is a
transparent type such as a
transparency film.
The document is
misaligned.
The document guides on
the document feeder are
not set in the correct
positions.
The document is a non-
standard size.
The document is folded.
The image is not [Color Scanning] is set to
scanned in color. [Black & White] or
[Grayscale].
The image is The resolution is too low.
coarse.
Image is saved with high
compression.
Black-and-white [Black & White] is selected
gradation is not for [Color Scanning].
reproduced
properly.
Cause
The pasted or folded section may not be
laying flat on the document glass. Place a
stack of white sheets on top of the
document to flatten the document
against the document glass.
Clean the document glass or the
document cover.
Reference
Refer to "Cleaning the Document Cover and
Document Glass" (P.99).
Place a white sheet of paper on top of the
document when scanning.
Load the document correctly.
Reference
Refer to "Scan" > "Scanning Procedure" in the User
Guide.
Load the document correctly, and align
the document guides to the document.
Reference
Refer to "Scan" > "Scanning Procedure" in the User
Guide.
Specify the document size.
Reference
Refer to "Scan" > "Scanning Procedure" in the User
Guide.
Flatten the curl and load the document
again.
Reference
Refer to "Scan" > "Scanning Procedure" in the User
Guide.
Set [Color Scanning] to [Color].
Reference
Refer to "Scan" > "E-mail" in the User Guide.
Set the resolution higher.
Reference
Refer to "Scan" > "Layout Adjustment" in the User
Guide.
Select a lower compression ratio in
[Quality/File Size].
Reference
Refer to "Scan" > "E-mail Options/Filing Options" in
the User Guide.
Set [Color Scanning] to [Grayscale].
Reference
Refer to "Scan" > "E-mail" in the User Guide.
Trouble during Scanning
Remedy
15
485