Local Terminal Information; Local Name; Company Logo - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Hide thumbs Also See for DocuCentre-V C2265:

Table of Contents

Local Terminal Information

You can set the local terminal information, including a local name and company logo.

The local name is shown in the recipient's touch screen or Activity Report. Depending on

the recipient's device, however, it may not be displayed.

Specify a local name with up to 20 single-byte characters using the keyboard displayed or

the numeric keypad.

Header Text or Cover Page. Specify a company logo with up to 60 single-byte characters

using the keyboard displayed or the numeric keypad.

Machine Password

Set the machine password when you want to limit the other parties that can send faxes.

When the machine password is set, only a party that sends the correct machine password

by F code is allowed to send or poll. Note that this means that faxes cannot be accepted

from a fax without the F Code feature.

Line 1 to 3 - Company Logo

Header Text or Cover Page. Enter up to 60 single-byte characters using the keyboard

displayed or the numeric keypad.

G3 Line 1 to 3 - Fax ID

When using G3 communications, register the G3 ID. The G3 ID is normally set to the local

terminal fax number.

Specify a G3 ID with up to 20 digits using the keyboard displayed or the numeric keypad.

G3 Line 1 to 3 - Dial Type

Set the dial type.

Tone dialing line.

The displayed items may vary depending on the options installed.

There are a maximum of three lines that can be used for G3 communications: line 1, line 2, and line 3.

You can set a company logo, G3 ID (fax number), G3 dial type, and G3 line type.

For information about how to enter characters, refer to "Entering Text" (P.45).

If [Line 1 to 3 - Company Logo] or [Company Logo for SIP Line] is not registered, the company logo is used.

A G3 ID (fax number) can consist of not more than 20 digits, including 0 to 9, +, and space.

Table of Contents

Docucentre-v c2263