Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 555

Error Code
021-435 [Cause] 3G communication by 3Gnet-BOX was failed to start because an
error requiring the initialization of 3Gnet-BOX and the restart of
the machine was detected.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
021-436 [Cause] An error occurred in the machine through the 3G
communication by way of 3Gnet-BOX.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
021-437 [Cause] A communication error in DNS server occurred through 3G
communication by way of 3Gnet-BOX.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
021-438 [Cause] The name resolution of EP server was failed in 3G
communication by way of 3Gnet-BOX.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
021-439 [Cause] The name resolution of the certificate authority that had issued
the EP client certificate was failed in 3G communication by way
of 3Gnet-BOX.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
021-440 [Cause] The communication is disabled in 3G communication by way of
3Gnet-BOX with this machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
021-500 [Cause] The following operation is performed when the Auditron mode
for the Fax service is enabled.
[Remedy] Wait for the active job finishes, and start the next job.
021-501 [Cause] The communication with the EP system via the internet failed.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
Cause and Remedy
While a Send Fax job is processing, another job that the
Auditron mode is enabled starts.
While another job that the Auditron mode is enabled is
processing, a Send Fax job starts.
Error Code
15
555