Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 504

Problem Solving
15
504
Error Code
016-428 [Cause] The 802.1x authentication method cannot be processed in the
setting of Ethernet2.
[Remedy] Set the authentication method of the machine to the same
method as set for the authentication server in the setting of
Ethernet2.
016-429 [Cause] The authentication connection of Ethernet2 timed out.
[Remedy] Confirm the network connection of Ethernet2 and switch
setting of the authentication device physically connected to the
machine via a network, and check whether it is connected to the
machine correctly.
016-430 [Cause] The user name or password for 802.1x authentication did not
match in the setting of Ethernet2.
[Remedy] Confirm and correctly enter the user name or password in the
setting of Ethernet2. If the error still is not resolved, check
whether the network environment is set correctly.
016-431 [Cause] An internal error occurred.
[Remedy] Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
016-432 [Cause] An error occurred in the SSL client certificate of Ethernet2.
[Remedy] Take one of the following measures:
016-450 [Cause] The SMB host name already exists.
[Remedy] Change the host name.
Reference
Refer to "Machine's E-mail Address/Host Name" (P.205).
016-453
[Cause] Updating of the IPv6 address and host name for the DNS server
failed.
[Remedy] Check whether the IP address of the DNS server is set correctly.
016-454
[Cause] Unable to retrieve the IP address from DNS.
[Remedy] Confirm the DNS configuration and IP address retrieve setting.
Reference
Refer to "Protocol Settings" (P.200).
016-455 [Cause] Connection to the SNTP server timed out.
[Remedy] Confirm the network cable connection and the IP address of the
SNTP server are correct.
Reference
Refer to "Machine Clock/Timers" (P.146).
016-456
[Cause] Received a message from the SNTP server stating that the
server is not synchronized with the standard time source.
[Remedy] Confirm the SNTP server settings.
Reference
Refer to "Machine Clock/Timers" (P.146).
Cause and Remedy
Store an SSL client certificate in the machine to set the SSL
client certificate.
If an SSL client certificate cannot be set on the machine,
select an option other than [EAP-TLS] in [Authentication
Method].