Fuji Xerox DocuCentre-V C2265 Administrator's Manual page 498

Problem Solving
15
498
Error Code
003-760 [Cause] An incompatible combination of feature is specified for
document scan conditions.
[Remedy] Confirm the selected options.
003-761 [Cause] The paper size of the tray selected for auto tray differs from the
paper size of the tray selected for Auto Paper selection.
[Remedy] Change the paper size for the tray, or change the [Paper Type
Priority] settings.
003-763 [Cause] An error occurred when reading the Calibration Chart.
[Remedy] Place the Calibration Chart correctly on the document glass.
Reference
Refer to "Executing Calibration" (P.103).
003-780
[Cause] Failed to compress the scanned document.
[Remedy] Reduce the resolution or the ratio for [Reduce/Enlarge] to
decrease the data size, or split the data to send it separately.
003-795
[Cause] When enlarging/reducing a scanned document to the paper size
specified, the reduction/enlargement ratio exceeds the allowed
range.
[Remedy] Take one of the following measures:
005-275 [Cause] An error occurred in the document feeder.
005-280
[Remedy] Switch off the machine power, make sure that the touch screen
005-500
is blank, and then switch on the machine power. If the error still
is not resolved, contact our Customer Support Center.
005-288 [Cause] An error occurred in the document feeder.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
010-327 [Cause] An error occurred in the machine.
010-328
[Remedy] Switch off the machine power, make sure that the touch screen
010-329
is blank, and then switch on the machine power. If the error still
010-331
is not resolved, contact our Customer Support Center.
010-332
010-333
010-334
010-335
010-337
010-379 [Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen
is blank, and then switch on the machine power. If the same
message is displayed again, contact our Customer Support
Center.
Cause and Remedy
Manually enter a reduction/enlargement ratio.
Change the paper size.