Ipv4 And Ipv6 Connection Problems; When Connection To A Desired Web Server Fails; Unable To Connect Using An Ipv4 Address - Fuji Xerox DocuCentre-V C2265 Administrator's Manual

Hide thumbs Also See for DocuCentre-V C2265:
Table of Contents

Advertisement

When connection to a desired Web server fails

The setting to use the proxy
server is not configured.
The setting to use a proxy server
is configured even though the
environment doesnot use a
proxy server.
The proxy server address
isincorrect.
When the proxy server access
requires authentication, you
cannot connect to the server
because the user name or
password is incorrect.

IPv4 and IPv6 Connection Problems

The possible causes and remedies for problems when using an IPv4 or IPv6 address are as
follows:

Unable to connect using an IPv4 address

When 0 (zero) is prepended to
the head of a value for the IPv4
address (for
example:192.0.2.010),
connection fails.
Unable to connect using an IPv6 address
You cannot connect to the
machine with the link-local
address.
The machine cannot connect to
a computer running Windows
OS that supportsIPv6.
Cause
In the environment using the proxy server, you must
configure the machine to use the proxy server to
connect to a desired Web server. Make sure that you
configure the settings to use the proxy server.
In an environment that does not use a proxy server,
such as when connecting to an intranet, do not make
the settings to use the proxy server.
When the settings to use a proxy server are configured,
you cannot connect to a desired Web server only if the
IP address of the proxy server is correct. Set the correct
IP address of the proxy server.
Set the user name and password on the machine that
allow connection to the proxy server.
Symptom
Do not prepend 0 (zero) to each value of an IPv4
address.
Symptom
When you specify the machine's link-local address, a
scope ID must be appended to the address. For
example, when you use Internet Explorer 7 on Windows
Vista to access the address "fe80::203:baff:fe48:9010",
you must append the Ethernet adapter local area
connection number (for example, 8) for Windows Vista
to the address as follows: fe80::203:baff:fe48:9010%8
Assign a static IPv6 address to the computer running
Windows OS that supports IPv6.Then, register the IPv6
address on the machine as host address to allow
communication.
Network-related Problems
Remedy
Remedy
Remedy
15
491

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docucentre-v c2263

Table of Contents