Xilinx RocketIO X User Manual page 45

Block Level Functions
•
•
•
The following dynamic signals indicate data to be transmitted on the transmit bus, along
with status signals that indicate specific information about how TXDATA is to be handled
while passing through the PCS. The set values of these signals define the application setup
by the user and are the most important after the static signals are allocated:
•
•
•
•
•
The following dynamic signals indicate various status information about the current state
or prior state of the PCS:
•
•
•
•
•
•
•
•
•
•
The following dynamic signals control internal states of the PCS:
•
•
The following dynamic signals affect the control registers of the PMA:
•
•
•
•
RocketIO™ X Transceiver User Guide
UG035 (v1.5) November 22, 2004
RXDISPERR[7:0]
RXNOTINTABLE[7:0]
RXDATA[63:0]
TXBYPASS8B10B[7:0]
TXCHARDISPMODE[7:0]
TXCHARDISPVAL[7:0]
TXCHARISK[7:0]
TXDATA[63:0]
CHBONDDONE, RXBUFSTATUS[1:0], RXCLKCORCNT[2:0]
CHBONDO[4:0]
PMARXLOCK
RXLOSSOFSYNC[1:0]
RXREALIGN
RXCOMMADET
TXBUFERR
TXKERR[7:0]
TXRUNDISP[7:0]
RXRUNDISP[7:0]
RXSLIDE
CHBONDI[4:0]
PMAREGADDR[5:0]
PMAREGDATAIN[7:0]
PMAREGRW
PMAREGSTROBE
www.xilinx.com
1-800-255-7778
R
45