Macro Auto Processing Type - Cisco Small Business 300 1.1 Series Administration Manual

Smartport Commands
78-20269-01 Command Line Interface Reference Guide
43.9

macro auto processing type

The macro auto processing type Global Configuration mode command enables or
disables automatic detection of devices of given type. The no format of the
command returns to the default.
Syntax
macro auto processing type
no macro auto processing type
Parameters
smartport-type—Smartport type (range: host, ip_phone, ip_phone_desktop,
switch, router or wireless access point (ap)).
Default Configuration
By default, auto detection of ip_phone, ip_phone_desktop, switch, and wireless
access point (ap) is enabled.
Command Mode
Global Configuration
Example
Example 1 - In this example, VLANs were de-activated because LLDP was
disabled.
console(config)#no macro auto processing lldp
console(config)#10-Apr-2011 16:21:16 %LINK-W-Down:
10-Apr-2011 16:21:16 %LINK-W-Down:
10-Apr-2011 16:21:16 %LINK-W-Down:
10-Apr-2011 16:21:16 %LINK-W-Down:
10-Apr-2011 16:21:16 %LINK-W-Down:
10-Apr-2011 16:21:16 %LINK-W-Down:
10-Apr-2011 16:21:16 %LINK-W-Down:
smartport-type enabled
{
smartport-type
Vlan 6
Vlan 7
Vlan 8
Vlan 9
Vlan 10
Vlan 20
disabled
| }
Vlan 5
43
638