12. Mechanical Adjustment; 12.1 Mechanical Adjustment Of The Paper Feed Section; Skew Adjustment Of The Tray 2, 3 - Konica Minolta Magicolor 8650 Service Manual

12. Mechanical adjustment

12. Mechanical adjustment

12.1 Mechanical adjustment of the paper feed section

12.1.1

Skew adjustment of the tray 2, 3

This adjustment must be made in the following case:
• To reduce paper skew that cannot be corrected by the registration loop adjust-
ment when the tray 2 or 3 is within the specifications.
1. Pull out the tray where this adjustment is made.
[1]
[1]
268
Confidential – for internal use only, do not distribute
2. Load the tray with the paper.
3. Move the set of the paper guides [1]
A02EF3C020DA
4. Remove the paper from the tray.
5. Secure the set of paper guides [1] on
A02EF3C021DA
Field Service Ver. 2.0 Nov. 2007
until no gap is produced between the
both ends of paper and the paper
guides.
the tray using a screw (M3 x 8 mm:
V121 0308 04).