Field Service Ver. 1.0 Aug. 2005
16.2 Mechanical adjustment of the bypass tray section
16.2.1
Adjustment of the Bypass Paper Size Unit
This adjustment must be made in the following case:
• The Bypass Paper Size Unit has been removed.
[1]
[2]
[2]
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
[3]
[3]
4036fs3050c0
[1]
[3]
[2]
4036fs3051c0
16. Mechanical adjustment
1. Install the gear so that the protrusion
of the gear [1] and the mark [3] on
the Bypass Guide Rack Gear [2] are
aligned in a straight line.
2. Install the Bypass Unit Cover so that
part A (edge) [2] of the Rack Gear [1]
for the Bypass Paper Size Unit and
part B [3] of the Bypass Unit Cover
are aligned in a straight line.
213