Network Setting - Konica Minolta Bizhub C650 Installation Manual

XXIII. Network setting
Make the TCP/IP address setting for the network.
Note:
Consult the network administrator for the setting
value to be entered and make settings as
required.
1. Select the function to be used as follows:
Utility/Counter → Administrator Settings → Enter
the Administrator Password → Network Settings →
TCP/IP Settings → IP Settings.
2. Touch "Manual Input" of IP Address Setting
Method and make the following settings.
IP Address: IP address of the controller
Subnet Mask: Subnet mask of the network, to
which the machine is connected
Default Gateway: IP address of the default gate-
way
3. Turn OFF and ON the Main Power Switch.
4. Select the function to be used as follows:
Utility/Counter → Administrator Setting → Enter the
Administrator Password → Network Settings →
Forward → Detail Settings → PING Confirmation,
and make the operation check of TCP/IP.
E-17