Press Space Bar to Toggle.
The following table describes the fields in this screen.
FIELD
Encapsulation
Idle Timeout
If you need a PPPoE service name to identify and reach the PPPoE server, please go to menu 11 and enter the
PPPoE service name provided to you in the Service Name field.
27.5 Basic Setup Complete
Well done! You have successfully connected, installed and set up your ZyWALL to operate on your network
as well as access the Internet.
Internet Access
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Service Type= N/A
My Login=
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel:
Figure 27-3 Internet Access Setup (PPPoE)
Table 27-3 New Fields in Menu 4 (PPPoE) screen
Press [SPACE BAR] and then press [ENTER] to choose PPPoE.
The encapsulation method influences your choices in the IP
Address field.
This value specifies the time in seconds that elapses before the
ZyWALL automatically disconnects from the PPPoE server.
ZyWALL Series Internet Security Gateway
DESCRIPTION
EXAMPLE
PPPoE
100
(default)
27-5