What You Need To Know About Ip/Mac Binding; Ip/Mac Binding Summary; Figure 199 Network > Ip/Mac Binding > Summary; Table 101 Network > Ip/Mac Binding > Summary - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 19 IP/MAC Binding

19.1.2 What You Need to Know About IP/MAC Binding

DHCP
IP/MAC address bindings are based on the ZyWALL's dynamic and static DHCP entries.
Interfaces Used With IP/MAC Binding
IP/MAC address bindings are grouped by interface. You can use IP/MAC binding with
Ethernet, bridge, VLAN, and WLAN interfaces. You can also enable or disable IP/MAC
binding and logging in an interface's configuration screen.

19.2 IP/MAC Binding Summary

Click Network > IP/MAC Binding to open the IP/MAC Binding Summary screen. This
screen lists the total number of IP to MAC address bindings for devices connected to each
supported interface.
Figure 199 Network > IP/MAC Binding > Summary
The following table describes the labels in this screen.
Table 101 Network > IP/MAC Binding > Summary
LABEL
#
Interface
Number of
Binding
Modify
Apply
308
DESCRIPTION
This is the index number of the interface.
This is the name of an interface that supports IP/MAC binding.
This field displays the interface's total number of IP/MAC bindings and IP addresses
that the interface has assigned by DHCP.
The Active icon displays whether or not IP/MAC binding is enabled for an interface.
Click it to activate or deactivate IP/MAC binding on an interface. Make sure you
click Apply to save and apply the change.
Click the Edit icon to go to the screen where you can edit an interface's IP/MAC
binding settings.
Click Apply to save your changes back to the ZyWALL.
ZyWALL USG 300 User's Guide