User/Group Group Summary Screen - ZyXEL Communications ZyWall USG20-VPN User Manual

Table 180 Configuration > Object > User/Group > User > Add (continued)
LABEL
OK
Cancel

29.2.3 User/Group Group Summary Screen

User groups consist of access users and other user groups. You cannot put admin users in user
groups. The Group screen provides a summary of all user groups. In addition, this screen allows
you to add, edit, and remove user groups. To access this screen, login to the Web Configurator, and
click Configuration > Object > User/Group > Group.
Figure 309 Configuration > Object > User/Group > Group
The following table describes the labels in this screen. See
information as well.
Table 181 Configuration > Object > User/Group > Group
LABEL
Add
Edit
Remove
Object
References
#
Group Name
Description
Member
Reference
29.2.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To
access this screen, go to the Group screen (see
Add icon or an Edit icon.
Chapter 29 Object
DESCRIPTION
Click OK to save your changes back to the USG.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so. Removing a group does not remove the user accounts in the group.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific user group.
This field displays the name of each user group.
This field displays the description for each user group.
This field lists the members in the user group. Each member is separated by a comma.
This displays the number of times an object reference is used in a profile.
USG20(W)-VPN Series User's Guide
461
Section 29.2.3.1 on page 461
Section 29.2.3 on page
for more
461), and click either the