Subaru 2002 IMPREZA Service Manual page 966

FUEL INJECTION (FUEL SYSTEMS)
(3) Install the power steering pump, and then
tighten the bolts.
Tightening torque:
22 N·m (2.2 kgf-m, 16.2 ft-lb)
(4) Install the power steering pipe brackets on
right side intake manifold.
(5) Install the front side V-belt.
<Ref. to ME(TURBO)-44, REMOVAL, V-belt.>
14) Install the cooler filler tank. <Ref. to CO-53, IN-
STALLATION, Coolant Filler Tank.>
15) Connect the accelerator cable.
16) Install the intercooler. <Ref. to IN(TURBO)-11,
INSTALLATION, Intercooler.>
17) Install the air cleaner element.
18) Install the air cleaner upper cover and air intake
duct as a unit. <Ref. to IN(TURBO)-7, INSTALLA-
TION, Air Cleaner.>
INTAKE MANIFOLD
19) Connect the connector to fuel pump relay.
20) Connect the battery ground cable to battery.
H2M1954
21) Lift-up the vehicle.
22) Install the under cover.
23) Fill the coolant. <Ref. to CO-26, FILLING OF
ENGINE COOLANT, Engine Coolant.>
EN0206
H2M1890
FU(TURBO)-20
EN0344
G6M0095