FUEL INJECTION (FUEL SYSTEMS)
14.Tumble Generator Valve Ac-
tuator
A: REMOVAL
1. RH SIDE
1) Release the fuel pressure. <Ref. to FU(TUR-
BO)-53, RELEASING OF FUEL PRESSURE, OP-
ERATION, Fuel.>
2) Open the fuel filler flap lid and remove fuel filler
cap.
3) Disconnect the ground cable from battery.
4) Remove the intake manifold. <Ref. to FU(TUR-
BO)-15, REMOVAL, Intake Manifold.>
5) Disconnect the connector from tumble generator
valve actuator RH.
6) Remove the tumble generator valve RH.
2. LH SIDE
1) Disconnect the ground cable from battery.
2) Disconnect the connector from tumble generator
valve LH.
TUMBLE GENERATOR VALVE ACTUATOR
G6M0095
EN1390
G6M0095
FU(TURBO)-42
3) Remove the tumble generator valve actuator LH.
B: INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
2. LH SIDE
Install in the reverse order of removal.
EN1391